VWD Ford Transit Medium/High Roof Passenger Sliding Door Double-Sliding Window | TR201-DS
Ford Transit Passenger Sliding Door Double Sliding Window | VWD TR201-DS (2015-2027 Medium & High Roof)
The VWD TR201-DS is the Ford Transit passenger sliding door window that gives you real airflow control. Both panels slide independently so you can open the front, rear, or both for maximum ventilation. You also get 5 mm solar privacy glass with 12% UV transmission, an integrated bug screen, and an integrated retractable shade. Urethane-bonded installation for a sealed, factory-style finish.
Key Features
- Double sliding vent design. Front panel opens. Rear panel opens. Both can open
- 5 mm solar privacy glass with 12% UV transmission.
- Passenger side sliding door position for Ford Transit
- Integrated bug screen for ventilation without insects
- Integrated retractable shade for privacy and light control
- Urethane bonded installation
- 1 year warranty
Fitment
- Vehicle: Ford Transit Van
- Years: 2015-2027
- Roof: Medium Roof or High Roof
- Wheelbase: 130 in, 148 in, 148 in Extended
- Position: Passenger Side Sliding Door
- MAY NOT WORK WITH FLARE/CAPSULES/REAR QUARTER EXTENSIONS (FRAME DEPTH 2 9/16 in (65 mm))
Technical Specifications
| Model | TR201-DS |
|---|---|
| Window Type | Double Sliding Vent Window |
| Overall Dimensions | 53.82 in x 29.17 in (1367 mm x 741 mm) |
| Slider Opening | 13.0 in x 15.9 in (330 mm x 403 mm) |
| Viewable Glass | 31.1 in x 15.9 in (790 mm x 403 mm) |
| Internal Frame Depth | 2 9/16 in (65 mm) |
| Glass | Solar privacy glass |
| Screen | Integrated bug screen |
| Shade | Integrated retractable shade |
| Installation | Urethane Bonded |
| Warranty | 1 Year |
| Glass Thickness | 5 mm |
| UV Transmission | 12% |
Learn more about UV transmission ↗
Installation
This is a urethane bonded window. Prep the cutout, dry-fit, clean, prime, and set with automotive glass urethane. Tape and support during cure. Do not drive until the urethane has cured per the urethane manufacturer specs.
Ford Transit TR201 Installation Overview
Installation of the TR201 passenger side sliding door windows requires removal of a portion of the inner stamped sheet metal on Ford Transit Medium Roof and High Roof vans.
This installation overview applies to:
- TR201-AW – Premium Awning Window
- TR201-F – Fixed Glass Window
- TR201-SE – SE-Series Sliding Window
The general process is:
- Identify and carefully cut the required inner sheet metal from inside the sliding door.
- Pay special attention to the upper front corner where the Transit door has a triangular stamped protrusion.
- Cut that upper front corner slightly smaller so the Trim-Lok edge molding and finished trim can fully seat without interference.
- File and deburr the cut edges so there are no sharp or raised areas.
- Prime or protect all freshly exposed steel.
- Install Trim-Lok edge molding over the finished sheet-metal edge.
- Dry-fit the window and verify clearance before applying automotive urethane.
- Urethane-bond the window in place and allow the adhesive to fully cure.
Important: Always verify the actual window and vehicle before cutting. The illustrated cut lines in our guide are intended as a visual reference and not as an exact cutting template.
FAQ
What vehicles does this window fit?
Ford Transit 2015-2027, Medium Roof or High Roof, wheelbase 130 in, 148 in, 148 in Extended, passenger sliding door location.
What are the measurements?
Overall: 53.82 in x 29.17 in (1367 mm x 741 mm). Slider opening: 13.0 in x 15.9 in (330 mm x 403 mm). Viewable glass: 31.1 in x 15.9 in (790 mm x 403 mm).
What tint is used?
5 mm solar privacy glass with 12% UV transmission.
How is it installed?
Urethane-bonded installation.
Ford Transit Van
| Model | Transit Van |
|---|---|
| Wheelbase | 130", 148", 148" Extended |
| Model Years | 2015–2027 |
| Roof Height | Medium Roof or High Roof |
Compatible with Ford Transit vans within the configurations listed above.
Installation & Support
Match the exact SKU, vehicle configuration and installation method before cutting. Overall glass dimensions are not a cutout template. Dry-fit the actual window and follow the model-specific instructions.
TR201-DS spec sheet & technical drawing
Ford Transit Medium/High Roof Passenger Sliding Door Double-Sliding Window. View the technical drawing below for this model.
| Drawing units | Millimeters; see the PDF for view-specific notes |
|---|
Use the drawing to review the profile and dimensions. Confirm the exact model, position and measurements before cutting; the PDF is not a full-size cutout template.
Search all VWD van window spec sheets · Window installation guides
Why Virtus
The road doesn't wait for the almost-right build.
Our modular architecture means your van grows with you — reconfigure it for weekend climbing trips, retrofit it for a season on the road, or strip it back for work Monday morning. No tools required. No compromises made.
