VWD Ford Transit Medium/High Roof Passenger Sliding Door SE-Series Sliding Window | TR201-SE
Transit Passenger Side Sliding Door - Sliding Window | VWD SE-Series TR201-SE (2015-2027)
The VWD TR201-SE is a half-slider window designed for the Ford Transit passenger-side sliding door. 5 mm solar privacy glass with 12% UV transmission and a built-in bug screen help keep the interior comfortable. A secure latch and urethane-bonded installation finish the installation with a sealed, factory-style look.
Key Features
- Half slider window for controlled airflow
- 5 mm solar privacy glass with 12% UV transmission.
- Passenger side sliding door position for Ford Transit
- Built-in bug screen
- Secure latch system
- Urethane-bonded installation
- 1-year warranty
Fitment
- Vehicle: Ford Transit Van
- Years: 2015-2027
- Roof: Medium Roof or High Roof
- Wheelbase: 130 in, 148 in, 148 in Extended
- Position: Passenger Side Sliding Door
Technical Specifications
| Model | TR201-SE |
|---|---|
| Window Type | Half Slider |
| Overall Dimensions | 53.82 in x 29.17 in (1367 mm x 741 mm) |
| Clear Ventilation Opening | 17.13 in W × 20.08 in H (435 mm W × 510 mm H) |
| Glass | Solar privacy glass |
| Screen | Built-in bug screen |
| Installation | Urethane Bonded |
| Warranty | 1 Year |
| Glass Thickness | 5 mm |
| UV Transmission | 12% |
Learn more about UV transmission ↗
Installation
This is a urethane-bonded window. Prep the cutout, dry-fit, clean, prime, and set with automotive glass urethane. Tape and support during cure. Do not drive until the urethane has cured per the urethane manufacturer's specs.
Ford Transit TR201 Installation Overview
Installing the TR201 passenger-side sliding door windows requires removing a portion of the inner stamped sheet metal on Ford Transit Medium Roof and High Roof vans.
This installation overview applies to:
- TR201-AW – Premium Awning Window
- TR201-F – Fixed Glass Window
- TR201-SE – SE-Series Sliding Window
The general process is:
- Identify and carefully cut the required inner sheet metal from inside the sliding door.
- Pay special attention to the upper front corner where the Transit door has a triangular stamped protrusion.
- Cut that upper front corner slightly smaller so the Trim-Lok edge molding and finished trim can fully seat without interference.
- File and deburr the cut edges to remove any sharp or raised areas.
- Prime or protect all freshly exposed steel.
- Install Trim-Lok edge molding over the finished sheet-metal edge.
- Dry-fit the window and verify clearance before applying automotive urethane.
- Urethane-bond the window in place and allow the adhesive to fully cure.
Important: Always verify the actual window and vehicle before cutting. The illustrated cut lines in our guide are for visual reference, not an exact cutting template.
FAQ
What vehicles does this window fit?
See the fitment details above for compatible years, roof heights and wheelbases.
What are the measurements?
See Technical Specifications for overall dimensions and the clear ventilation opening in inches and millimeters.
What tint is used?
5 mm solar privacy glass with 12% UV transmission.
How is it installed?
Urethane-bonded installation.
Installation & Support
Match the exact SKU, vehicle configuration and installation method before cutting. Overall glass dimensions are not a cutout template. Dry-fit the actual window and follow the model-specific instructions.
TR201-SE spec sheet & technical drawing
Original SE-Series sliding-window drawing. Dimensions shown identify the illustrated components; verify the fully open ventilation clearance separately.
Ford Transit Medium/High Roof Passenger Sliding Door SE-Series Sliding Window. View the technical drawing below for this model.
| Drawing units | Millimeters; see the PDF for view-specific notes |
|---|
Use the drawing to review the profile and dimensions. Confirm the exact model, position and measurements before cutting; the PDF is not a full-size cutout template.
Search all VWD van window spec sheets · Window installation guides
Why Virtus
The road doesn't wait for the almost-right build.
Our modular architecture means your van grows with you — reconfigure it for weekend climbing trips, retrofit it for a season on the road, or strip it back for work Monday morning. No tools required. No compromises made.
