VWD Sprinter Driver Forward SER-Series Sliding Window (Rear Opening) | SL101-SER
Sprinter Driver Side Forward Sliding Window (Rear Opening) | VWD SER-Series SL101-SER (2007-2027)
This is the driver side forward sliding van window most Sprinter builds need for real airflow where heat and condensation build up. The VWD SER-Series SL101-SER is a direct-fit, urethane-bonded, rear-opening half slider with solar privacy glass and a built-in bug screen. Clean OEM all-glass look outside. Practical ventilation inside.
Why the driver side forward window location matters
- Helps reduce overnight condensation in the sleeping zone
- Improves airflow where cabinets and bedding trap warm air
- Works well with roof vents for cross-breeze ventilation
- Rear-opening slider helps push airflow into the living space
Key Features
Solar privacy glass
- Improves daytime privacy
- Helps reduce interior heat buildup
- Protects interior materials from UV exposure
Built-in bug screen
- Fiberglass mesh screen included
- Ventilate while parked without adding an extra screen
Security latch system
- Spring-loaded latch auto-locks when closed
- Secure during travel
OEM all-glass exterior styling
- Clean, factory-like appearance that follows Sprinter body lines
Fitment
- Vehicle: Mercedes-Benz Sprinter Van
- Model Years: 2007-2027
- Roof Height: Low Roof and High Roof
- Wheelbase: 144 and 170
- Position: Driver Side Forward (direct-fit body stamp location)
Installation
Installation type is urethane-bonded for a permanent weather-tight seal suitable for DIY builders and professional upfitters. Use a quality urethane system and follow proper prep, primer, and cure time procedures.
Mercedes Sprinter SL101 Installation Overview
Installation of the SL101 driver-side forward windows requires removal of a portion of the inner stamped sheet metal on compatible Mercedes-Benz Sprinter vans.
This installation overview applies to:
- SL101-AW – Premium Awning Window
- SL101-CA – Crank-Out Awning Window
- SL101-DS – Double-Sliding Window
- SL101-F – Fixed Glass Window
- SL101-SE – SE-Series Sliding Window
- SL101-SER – Rear-Opening Sliding Window
- 2007–2027 Mercedes-Benz Sprinter
- Driver Side Forward Position
The general process is:
- Identify and carefully cut the required inner sheet metal from inside the van when possible.
- File and deburr the cut edges to remove any sharp or raised areas.
- Prime or protect all freshly exposed steel.
- Install Trim-Lok edge molding over the finished sheet-metal edge.
- Clean all metal debris from the wall cavity.
- Dry-fit the actual SL101 window and verify complete clearance before applying automotive urethane.
- Urethane-bond the window in place and allow the adhesive to fully cure.
Important: Always verify the actual Sprinter configuration, wheelbase, and exact SL101 window before cutting. The illustrated cut area is a visual reference, not an exact cutting template.
Technical Specifications
| Model | SL101-SER |
|---|---|
| Window Type | Rear Opening Half Slider |
| Overall Dimensions | 55.20 in x 30.6 in (1402 mm x 777 mm) |
| Slider Opening | 20.47 in x 20.87 in (520 mm x 530 mm) |
| Glass Type | Solar privacy glass |
| Installation Type | Urethane Bonded |
| Warranty | 1 Year |
| Glass Thickness | 4 mm |
| UV Transmission | 17% |
Learn more about UV transmission ↗
Best uses
- Bed head ventilation
- Condensation reduction
- Stealth camping comfort
- Cabinet wall airflow
- Pet airflow safety
- Daily driver comfort
FAQ
Why install a window near the bed area?
It helps remove moisture buildup overnight and improves sleeping comfort, especially when paired with a roof vent for cross-breeze airflow.
Is the SL101-SER a rear-opening slider?
Yes. The sliding panel opens toward the rear (rear-opening half slider), helping direct airflow into the living space.
Does the window include a bug screen?
Yes. It includes a built-in fiberglass mesh insect screen.
Does the tint provide privacy?
Yes. Solar privacy glass .
Will it match the factory appearance?
Yes. It is designed to blend with OEM Sprinter body lines with an all-glass exterior style.
Does the window leak?
Proper urethane installation creates a weather-tight seal.
Can it stay open overnight?
Yes. The screened sliding panel allows controlled ventilation while parked.
What are the measurements?
Overall dimensions: 55.20 in x 30.6 in (1402 mm x 777 mm). Slider opening: 20.47 in x 20.87 in (520 mm x 530 mm).
Related internal links
Vehicle Fitment Guide
Mercedes-Benz Sprinter Van
| Model | Sprinter Van |
|---|---|
| Wheelbase | 144" or 170" |
| Model Years | 2007–2027 |
| Roof Height | Low Roof or High Roof |
Designed to fit Mercedes-Benz Sprinter vans within the configurations listed above.
Installation & Support
Match the exact SKU, vehicle configuration and installation method before cutting. Overall glass dimensions are not a cutout template. Dry-fit the actual window and follow the model-specific instructions.
SL101-SER spec sheet & technical drawing
Sprinter Driver Forward SER-Series Sliding Window (Rear Opening). View the technical drawing below for this model.
| Drawing units | Millimeters; see the PDF for view-specific notes |
|---|
Use the drawing to review the profile and dimensions. Confirm the exact model, position and measurements before cutting; the PDF is not a full-size cutout template.
Search all VWD van window spec sheets · Window installation guides
Why Virtus
The road doesn't wait for the almost-right build.
Our modular architecture means your van grows with you — reconfigure it for weekend climbing trips, retrofit it for a season on the road, or strip it back for work Monday morning. No tools required. No compromises made.
